VapeCon starter kits upgrades and spare parts (Freemax Maxus)
VapeCon starter kits advice for Romania, covering how to use, what to look for and where the trade-offs actually sit.
Finding the right vapecon starter kits in Romania is easier than most catalogues make it sound. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
The gap between a mid-range and a premium vapecon starter kits narrows once you know which components you actually use. Expect roughly 1183 full puffs from a charge at 20 mg/ml, based on average session length in our testing.
Two things to check before ordering: the Micro-USB socket on the base and whether the 1.4 Ω mesh coil is the newer generation. Battery behaviour is where the Innokin Sceptre earns its keep: the 1500 mAh cell holds a usable charge for most of a day at 200 and recharges over Micro-USB. We would pair the Innokin Sceptre with a 55:45 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Comparing this against a 55:45 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 3.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. We would pair the Innokin Sceptre with a 55:45 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Expect roughly 1183 full puffs from a charge at 20 mg/ml, based on average session length in our testing. Replacement coils are widely available, and the 1.4 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.4 Ω mesh mark before the profile flattens and a swap makes sense.
Specifications
Every unit in the Innokin Sceptre family shares the same core platform, so the differences come down to the numbers below.
| Reference model | Innokin Sceptre |
|---|---|
| Brand family | Suorin |
| Battery capacity | 1500 mAh |
| Power range | 200 W |
| Liquid capacity | 3.0 ml |
| Coil | 1.4 Ω mesh |
| Bottle size | 1.6 ml |
| Liquid ratio | 55:45 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | anodised aluminium |
| Charge port | Micro-USB |
| Connector | 510-X |
| Airflow | adjustable sliding |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 55:45 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.4 Ω mesh mark before the coil begins to mute it.
Practical considerations in Romania
Availability in Romania is the factor that decides most outcomes here. Confirm the 1.4 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and RON rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.
